Kona Fire Mountain
I really like retro bikes. My last project, the 1994 Nakamura Vertical, I completed last year for one of my friends, kicked me in to a new retro project...and I did not hesitate. I had some more unused Shimano XTR bike components, as well as a brand new pair of Michelin Wildgripper tyres, thus I decided to build a new bike - Kona Fire Mouintain.
Solid basis of the 1994 Kona Fire Mountain is a steel frame made from cro-moly Tange tubes. I bought this frame from a guy who wanted to throw it out. The frame looked good, frankly speaking, with solid, but very much used and here-and-there damaged painting. I quickly decided to repaint the frame in my custom colour and design (inc. stickers). In adition to that I decided to re-work some brake and shifter cable stops as per new bike components needs. It`s still the 1994 Kona Fire Mountain, but in fresh rebuild and custom design. I think that this design hasn`t been ever used by Kona, has it been?
The 1995 Rock Shox Judy SL suspension forks were again my only choice. Thanks to my garage corners I found the one that fit the project very well. I did general fork restoration some time ago and the fork has not been used since then. Like in previous "retro" project, I re-sprayed the fork legs, crown and brace in Audi Monsoon Grey, the same colour as I made the frame. The fork got new oil in damping cartridge and a new set of Rock Shox stickers.
Similar to frame and suspension fork parts, I did re-spray the Kore LiteStem, too. That was my choice and I`m happy I did it. The stem got new black titanium bolts and washers, and a new set of custom Kore LiteStem decals copying a design of the Kona decals.
The Easton E9 TaperLite MTB handlebars were too short for today`s XC ridding and therefore I extended them with the extender plugs up to 600mm. New cockpit has been completed with a pair of legendary ODI Attack MTB grips.
Chris King NoThreadSet...in green colour...great choice ever, I though. Nothing to say more. Headset spacers from Parts of Passion (POP) are a must when tuning bike ridding position.
The old-school 3 x 9 drivetrain and V-brake setup came to my mind from legendary Shimano XTR MTB group. Well, brakes and top-pull derailleur in my stock were that initial trigger to modify the brake and shifter cable stops on the frame. I didn`t want to mount back the cantilever brakes and down-pull front derailleur, thus all these changes on the frame. I re-used the Kooka Racha brake levers, that have been taken from another retro bike in my garage. The levers fit my needs, although they are not V-brake type.
Back again to the drivetrain. All drivetrain components came from Shimano XTR 952 group, as I said. I mean front and rear derailleurs, shifter pods, cassette, crankset and bottom bracket. All of them represent old-but-good MTB XC standard from mid-to-end 90`s. Housing and cabling have been managed by Shimano.
Classic mountain bike rides on classic mountain wheels, right. My 26" wheels were built with green Tune hubs and black SUN rims, layced with black DT Swiss spokes and nipples. A key component used in this project were new-old-stock green Michelin Wildgripper tyres, reserved especially for this project for years. Green Tune AC quick releases made up the wheels definitive perfect.
I really like retro bikes. I enjoyed much this project and that was big fun building the 1994 Kona Fire Mountain in my custom design I was dreamt of. I believe that this Kona will appear to be a unique bike in old-school world of mountain biking. Enjoy this Kona and send me back your thoughs.