Custom bikes building

...a mountain bike you have always dreamt of.

  • Custom bikes building

    Custom bikes building

    ...a mountain bike you have always dreamt of.

SHIMANO XTR FC-M952 Crankset Restoration, Vol. 2

I`ve got another chance to make a greatful restoration of the Shimano XTR FC-M952 crankset. The cranks themselves were in very poor condition (as usual after years of riding), thus I didn`t have much work to remove old painting (already have a lot of skills how to do it). After intensive brushing and cleaning the cranks I wanted to apply anodization, however, I decided to use a new coating - teflon. I had discussons with some coating makers and I chose XYLAN 8840. Very durable coating with deep black colour and a little abrasive surface. A new "Shimano XTR" logo has been lasered directly to teflon. Self extracting dust caps have been re-anodized in black. All completed with a set of original 4-arm chainrings (all three in very good condition) and with original Shimano bolts. The crankset can be completed with a Shimano Hollowtech II bottom bracket, 68x109,5mm (not in the picture)

Shimano XTR FC-M952 w/Teflon coating

custombikes
building.com

Peter Lucansky,
Bratislava

custombikesbuilding.com
custombikesbuilding.sk



...a mountain bike you have always dreamt of

custombikesbuilding.com

Peter Lúčanský,
Bratislava

custombikesbuilding.com
custombikesbuilding.sk



...a mountain bike you have always dreamt of

copyright © 2008-2018 | Peter Lucansky | all rights reserved